| Below you will find news published by RESA in recent months. For more information, please click on the corresponding link. |
| |
 RESA goes to Russia…
When the Khrabrovo International Airport in Kaliningrad, Russia wanted to modernize its Passenger Processing Systems it chose RESA.
Thanks to the CREWS systems (CUTE/CUPPS and Local DCS), Kaliningrad airport resources can be shared by all airlines and handling agents operating on the platform. In addition, the Local DCS system that graphically manages check-in and boarding operations contributes to improving passenger management.
This supports the airport’s further development as well as marks RESA’s entrance to the Russian market.
For more information about CREWS and CREWS LDCS systems, please click on the link below:
|
| |
| |
 BEST WISHES 2012!
RESA wishes you a happy and prosperous year 2012!
To display our greetings card, please click on the link below: |
| |
| |
 RESA involved in the EURO 2012 in Ukraine…
After being selected to equip Luanda airport for the African Cup of Nations in 2010, RESA has been chosen by the National Agency EURO 2012 for the modernization of Lviv and Donetsk airports in Ukraine. These two airports will soon welcome millions of fans gathered to support their teams at the upcoming European Football Championship.
With its Ukrainian partner DPS, RESA will implement its comprehensive software suite called GAIMS (Global Airport Information Management System) on these two airport platforms.
The introduction of these new systems, ranging from passenger and baggage processing, flight management, resource allocation to billing and flight information display systems, will help Lviv and Donetsk airports to cope with the sharp increase in traffic with the highest security level and quality of service for their passengers.
For more information about the GAIMS software suite, please click on the link below:
|
| |
| |
 RESA sponsors the “Airport Expansion and Development Africa 2011”…
RESA is pleased to sponsor the new edition of the “Airport Expansion and Development Africa” summit which will take place in Johannesburg in South Africa from 21st to 23rd November 2011.
During this high-level strategic summit, governments, airport authorities, civil aviation authorities and operators will meet to discuss growth strategies and opportunities in the booming African airport market.
This event is an opportunity for RESA to affirm its commitment to Africa and confirm its position of first I.T. provider for African airports.
For more information about the “Airport Expansion and Development Africa 2011”, please click on the link below: |
| |
| |
 Basel Mulhouse Airport strengthens security on its platform thanks to PAXTRACK…
Already equipped with RESA CUTE CREWS system since 2006, Basel Mulhouse Airport renews its confidence in RESA with the recent installation of PAXTRACK, RESA passenger tracking system.
Thanks to this new system, the airport will follow its passengers, improve controls at security checkpoints, generate statistics, etc.
After Bangalore, Brussels, Douala, Fort-de-France, Luxembourg, Lyon, Montreal, Nantes, Tallinn, Toulouse and Yaoundé, Basel Mulhouse is the twelfth airport equipped with PAXTRACK.
For more information about PAXTRACK, please click on the link below:
|
| |
| |
 RESA participates in the 21st ALFA-ACI congress organized by the two airports of La Réunion island…
RESA is pleased to take part in the 21st congress of ALFA-ACI, French organization of French-speaking airports, which will take place in “La Réunion” island from 5th to 7th October 2011.
The organization of this major event has been entrusted to the two local airports, “Saint-Pierre Pierrefonds” airport and “Roland Garros” airport, equipped with RESA systems since 1999. This year again the meeting will bring together airlines, building companies, airport managers and directors and will focus on “Sustainable development: green light for the airport future?”.
For more information about the 21st ALFA-ACI congress, please click on the link below:
|
| |
| |
 RESA gains a foothold in Spain…
In partnership with the international group Indra Sistemas, RESA has been awarded for the equipment of 3 new airports in Spain: Castellon and Murcia, located on the east coast, and Gibraltar, British overseas territory located on the southern end of the Iberian Peninsula.
These 3 platforms will therefore improve service to their passengers thanks to the implementation – before the end of 2011 – of RESA’s CUTE/CUPPS (CREWS), Local DCS (CREWS LDCS) and BRS (BAGERA) systems.
For more information about RESA systems, please click on the link below: |
| |
| |
 RESA confirms its position of French leader in airport IT systems…
RESA has been recently assigned to equip several airports in Metropolitan France and overseas. The company thus takes part in the modernization of Mayotte, Paris-Vatry, Cherbourg, Rouen, Tours, Saint-Martin airport platforms with the installation of CREWS LDCS (CUTE/CUPPS), INFOPAX (AODB), VISTA (FIDS) and INVOICE (invoicing system).
Thanks to these 6 new references, RESA confirms its position of French leader in airport IT systems with about 50 French airports already equipped with its solutions.
For more information about RESA, please click on the link below: |
| |
| |
 RESA is pleased to sponsor once again the Breitling 100/24 cup…
Departure from Toulouse-Francazal, arrival on the Villacoublay air base, the Breitling 100/24 cup will take place on June 15 and 16, 2011. The 2011 challenge will bring together 15 planes. Each plane will have to take off and land on 100 different airfields.
Beyond the technical and human achievement, the aim of this challenge is to emphasize the diversity of the French airport patrimony.
For the third year in a row, RESA, French leader in airport IT systems, is pleased to associate its name to this challenge and wishes a great success to the crews.
For more information about this event, please click on the link below:
|
| |
| |
 Rodez-Marcillac airport trusts RESA for the equipment of its new terminal…
After Toulouse-Blagnac and Tarbes-Lourdes Pyrénées airports which are already equipped with RESA systems, Rodez-Marcillac, the 3rd airport of the Midi-Pyrénées region, has chosen RESA to accompany its development and equip its new terminal.
The CREWS (CUTE/CUPPS, Local DCS) and VISTA (FIDS) systems have just been installed on the platform. Thanks to the CREWS systems, check-in and boarding processes which were handled manually so far, are now computerized.
On the other hand, VISTA system manages and displays flight information on the display terminals connected to the airport network.
For more information on CREWS, CREWS LDCS and VISTA systems, please click on the link below:
|
| |
| |
 RESA is participating in the upcoming Passenger Terminal Expo in Copenhagen…
RESA will exhibit at the next Passenger Terminal Expo to be held from 29th to 31st March 2011 in Copenhagen, Denmark. On this occasion, RESA will be pleased to present its entire range of solutions especially the new functionalities of its Airport Operational Database (INFOPAX) and billing system (INVOICE) as well as the new version of its baggage reconciliation system (BAGERA).
At this unavoidable world's leading international airport exhibition, RESA will be pleased to welcome you on its booth n°3015 located near the main entrance.
For more information on PTE 2011, please click on the link below:
|
| |
| |
 The installation of RESA systems at Erbil International Airport carries on…
After the commissioning of CREWS, CREWS LDCS and BAGERA systems at the end of 2009, RESA has been once again chosen by the biggest airport of Irak, the Erbil International Airport, for the installation of its latest Airport Operational Database (INFOPAX V4). This new version enables importation of seasonal schedule, optimization and automation of real time and daily flight management thanks to the reception and decoding of IATA messages.
With the installation of its Information Broker FAIRWAY, RESA has also developed several interfaces as for example interface with the Baggage Handling System (BHS) or the Flight Information Display System (FIDS) already installed on the Iraqi platform.
For more information about the Erbil International Airport, please click on the link below: |
| |
| |
 AEROPORTS DE PARIS chose BAGERA!
Further to an international tender, Aéroports de Paris chose RESA for the provision and implementation of its new Baggage Reconciliation and Tracking System.
With BAGERA, Aéroports de Paris will benefit from a comprehensive system ensuring real-time baggage tracking, passenger/bag reconciliation, baggage safety marking, optimized unloading and transit time, statistics production, record of all actions, etc.
Paris becomes the 10th French-speaking airport to trust RESA in terms of baggage reconciliation as well as the 18th airport site equipped with BAGERA.
For more information about our BAGERA system, please click on the link below:
|
| |
| |
 RESA has two new references on the African continent…
RESA has lately equipped two new airports on the African continent. In partnership with the Spanish company Indra Sistemas, RESA has installed its CUTE CREWS and Local DCS systems in two Angolan airports: Luanda and Lubango.
Thanks to these new systems, airlines and handling agents operating on the Angolan platforms can now share check-in desks and boarding gates.
Thanks to these new references, RESA expands its presence in Africa and confirms its position as major partner of African airports.
For more information about our CREWS and CREWS LDCS systems, please click on the link below:
|
| |
| |
 Aéroports de Lyon chooses RESA CREWS LDCS system…
Aéroports de Lyon has chosen RESA CREWS LDCS system to equip its airports. This local system will ensure the check-in and boarding operations by printing boarding passes and bag tags as well as reading the printed documents at boarding gates.
Moreover by acquiring the additional LDCS WebCheck module, Aéroports de Lyon gives its passengers the opportunity to check in and print their boarding pass before their arrival at the airport; thus avoiding queues at check-in desks. Cut over of the systems is planned for early 2011.
For more information about CREWS LDCS system, please click on the link below:
|
| |
| |
 RESA equips a new airport in Nigeria…
After the implementation, in 2009, of some of its systems at the international airport of Lagos, the biggest city of the country, RESA has installed its CREWS CUTE system and Local Departure Control System at the international airport of Abuja, capital city of Nigeria.
Thanks to these new systems, airlines and handling agents operating on the airport platform can now share check-in desks and boarding gates.
In partnership with Maevis Limited, RESA carries on its development in Nigeria. The company has already planned to provide additional systems to the Abuja airport with the installation of its Airport Operational Database (INFOPAX), its Flight Information Display System (VISTA) and its invoicing system (INVOICE).
For more information about the Abuja international airport, please click on the link below:
|
| |
| |
 RESA is participating in the 19th ACI Africa annual assembly…
From 13th to 17th September 2010, RESA is participating in the 19th ACI Africa Annual Assembly, Regional Conference & Exhibition (AARC). The event is held in the capital city of Nigeria, Abuja, 22nd major African airport equipped with RESA systems. This year, the theme of the conference is: "The challenge of safety, security and technology in the emerging trend of airports development in Africa".
The AARC is a major annual event bringing together African airport managers and representatives of the air transport industry. RESA will be represented by its Nigerian partner: Maevis who will exhibit in the exhibition hall adjoining the conference hall.
For more information about the ACI Africa Annual Assembly Regional Conference & Exhibition, please click on the link below:
|
| |
| |
 RESA is installing its new CREWS LDCS CUSS module at Punta Cana airport…
RESA just developed its new CREWS LDCS CUSS module, currently installed at Punta Cana airport in Dominican Republic. This application enables passengers to check in and print their boarding passes from RESA self-service kiosks installed at the airport.
By using this new system, passengers traveling from Punta Cana airport will be able to directly drop their bags at a baggage drop-off counter (or proceed to the gate if they do not have any luggage).
CREWS LDCS CUSS improves service to passengers and optimizes management of the travelers flow thus reducing waiting time at check-in desks.
For more information on the CREWS LDCS CUSS module, please click on the link below: |
| |
| |
 RESA sponsors the 7th French Aviation Forum…
RESA is pleased to sponsor the 7th French Aviation Forum which will take place in the world renowned city of Lourdes from 23rd to 25th June 2010. French Connect brings together French airports, European low cost and regional airlines to do business and discuss issues relevant to the French market. The 2010 forum is offering even more to delegates: an extended conference programme, interactive workshops led by specialists, one-to-one meetings.
The event will be hosted by Tarbes-Lourdes Pyrénées Airport, RESA’s client since 2005. After having purchased RESA CREWS system (CUTE), Tarbes-Lourdes Pyrénées Airport chose to extend its range of RESA products and lately equipped itself with INFOPAX (AODB), VISTA (FIDS) and INVOICE (invoicing).
For more information about French Connect, please click on the link below:
|
| |
| |
 RESA equips the new terminal at Oran’s Es Senia airport…
In partnership with Egis Avia, RESA equips the new terminal at Oran’s Es Senia airport for passengers check-in and boarding (CREWS and CREWS LDCS), flights management (INFOPAX) and flight information display (VISTA). Specially designed to receive the 3,000 visitors expected to attend the 16th International Conference and Exhibition on Liquefied Natural Gas (LNG16) to be held in Oran from 18 to 21 April 2010, this new 5,000 sq.m terminal will increase the airport capacity from 2.4 to about 3 million passengers per year.
For more information on the LNG16, please click on the link below: |
| |
| |
 RESA alongside Hermes Airports for the opening of the new Larnaca airport in Cyprus…
After the opening of the new Pafos airport in November 2008, Cyprus opened on November 17th 2009 a state of the art brand new airport in Larnaca. The 100,000 m² new terminal is three times bigger than the existing one and will serve 7.5 million passengers per year.
Hermes Airports consortium, including Bouygues Bâtiment International and Egis Projects as main shareholders, entrusted RESA for the provision of IT systems covering all the airport’s needs. The GAIMS software suite will assist the airport in its growth and help Cyprus to become an important hub.
For more information on the international Larnaca airport, please click on the link below: |
| |
| |
 RESA CREWS CUTE platform is IATA CUPPS certified…
RESA, first European CUTE platform provider, is CUPPS certified on the first official launch date set by IATA on October 15, 2009.
CREWS is the world first CUPPS system certified by a Compliant Testing Entity (Lufthansa systems), installed in an international hub (Brussels Airport), fully approved and operationally used by two airlines (Lufthansa and Iberia). Some other tests have already been conducted with Continental and American Airlines. The RESA team thanks its clients and partners for their trust and support enabling this major innovation.
For more information on the new CUPPS standard, please click on the link below: |
| |
| |
 RESA certifies new BCBP IER printers…
Since RESA installed in December 2006 the first 100% bar-code airport in the world (EuroAirport BSL), it has been actively supporting IATA’s “Simplifying the Business” program. RESA’s policy is to regularly certify new peripherals. According to this policy, RESA has just certified new IER 2D bar-code printers. The IER 400 and IER 560, designed for check-in operations, are multi-function machines that can print high quality 1D and 2D bar codes (including IATA compliant PDF 417, Datamatrix, Aztec and QR codes).
The IER 400 is a single feed, thermal printer printing 1D and 2D bar codes on both boarding passes and bag tags.
The IER 560 is a 4 input, direct thermal, flexible printer that can print boarding passes and bag tags simultaneously.
For more information about IER 400 and IER 560 printers, please click on the link below: |
| |
| |
 RESA exhibiting at the Check-In show in Las Vegas…
For the third year in a row, RESA will take part in the Check-In show dedicated to the latest check-in technologies such as mobile phone check-in and self-boarding. The event will take place at the Mandalay Bay Resort & Casino on September 16th to 18th, 2009. RESA will welcome you on its American partner’s booth (Stand n°24) where the sales team will be pleased to present the entire range of airport solutions and especially the new PAXTRACK software, a passenger control and tracking system.
For more information about the Check-In show, please click on the link below:
|
| |
| |
 French overseas departments and territories airports equipped with RESA’s Baggage Reconciliation System…
RESA carries on establishing its Baggage Reconciliation and Tracking System on the French overseas departments and territories’ market with the equipment of Nouméa, Pointe-à-Pitre and Fort-de-France airports. Thanks to this user-friendly system, airlines are now able to carry out a continuous baggage tracking from check-in to loading. As an essential tool for airport security that allows to unload baggage in record time, BAGERA also improves service to passengers and lowers the number of lost baggage. After Brest in Metropolitan France, Nouméa, Pointe-à-Pitre and Fort-de-France are the first French airports equipped with their own BRS.
For more information about our BAGERA system, please click on the link below: |
| |
| |
 GLOBAL SYSTEMS chooses RESA to equip 10 Cuban airports…
In partnership with Global Systems, RESA has installed its CUTE CREWS and local DCS systems in 10 Cuban airports, especially 2 major sites: Havana and Varadero and 8 peripheral sites. RESA has implemented a centralized configuration organized around the Havana international airport. HVA airport centralizes all the airlines communication lines, the anti-virus control and manages remote administration of all the peripheral sites. All the servers were installed, configured and tested in RESA’s lab before deployment on site, enabling us to successfully equip all the airports in less than 3 months.
For more information on the Cuban airports, please click on the link below: |
| |
| |
 RESA is involved in the CUPPS definition…
As an IATA strategic partner, RESA is actively participating in the CUPPS working group. In partnership with airlines and other IATA members, RESA contributes to the development of the new standard with a view to harmonizing the interface among airline applications and shared platforms.
RESA is already working on a complete revision of the current CUTE platform which will ensure compatibility of the airline applications already integrated in CREWS.
For more information on the CUPPS standard, please click on the link below: |
| |
| |
 RESA equips the new Pafos airport in Cyprus…
The new Pafos airport, in Cyprus, welcomed its first passengers on November 17th 2008 with a brand new terminal able to handle 2.7 million passengers per year (compared with 1.5 million before). Hermes Airport, the airport handler, entrusted RESA for the provision of IT systems covering all the airport’s needs, from passenger and baggage processing, flight management, resources allocation through to billing and flight information display systems. RESA software suite, called GAIMS, will assist the airport in its growth, provide high security level and ensure the highest quality of service delivered to its passengers.
For more information on the new Pafos airport, please click on the link below: |
| |
| |
|
|
Domaine d'Asson
85 600 La Boissière de Montaigu
France
Tel: +33 (0)2 51 24 70 00
Fax: +33 (0)2 51 24 70 01
E-mail: info@resa.fr
|
|
